Price AU $725,000 No more to pay - sail away SOLD
Price
AU $725,000 No more to pay - sail away
Details
SUPERBLY BUILT!
Custom designed by Gary Lidgard for the previous European owner's and their occasional guests for their world circumnavigation. The original design criteria called for seaworthiness and strength ( Hulls laid up to 200 mm above waterline, with 300 grms of kevlar /epoxy and 400 grms of double bias fibreglass/epoxy for almost bullet proof strength) and the ability to go anywhere on the planet, including to windward and to have fun sailing. She is setup to be single handed if required and is well proven after completing a 4 year world circumnavigation with her original owners and has now undergone an extensive 11 month professional refit completed in early 2024. The refit was managed and documented by a marine surveyor and includes new main engines, gearboxes and an upgrade of all essential machinery and systems ( electrical, plumbing, mast, rigging, running gear etc).
Due to an unforeseen change in circumstances the vessel is offered for sale at a fraction of the replacement cost and is truely ready to take her new owner's anywhere. "Sleipnir 3" will appeal to anyone who wants true sailing ability, appreciates build quality of the highest standard and understands the freedom that high quality, simple systems provide for remote area cruising.
For the lover of performance sailing, she does 7.1 kt in 8.1 kts of wind, she has 865 mm under bridgedeck clearance to minimize slamming, outboard steering stations that provide excellent vision of the sails and 360 degree vision of the horizon when on watch however on ocean passages the auto pilot does the work and there is a fully weather protected seated position under the hardtop for the watch keeper.
The fully equipped stainless steel topped galley is down aft in the port hull, front and top opening refrigeration amidships forward and within reach of the galley, and a guest double forward in the port hull.
The spacious owner's queen cabin is aft in the starboard hull, bathroom and separate shower forward.
Custom designed by Gary Lidgard for the previous European owner's and their occasional guests for their world circumnavigation. The original design criteria called for seaworthiness and strength ( Hulls laid up to 200 mm above waterline, with 300 grms of kevlar /epoxy and 400 grms of double bias fibreglass/epoxy for almost bullet proof strength) and the ability to go anywhere on the planet, including to windward and to have fun sailing. She is setup to be single handed if required and is well proven after completing a 4 year world circumnavigation with her original owners and has now undergone an extensive 11 month professional refit completed in early 2024. The refit was managed and documented by a marine surveyor and includes new main engines, gearboxes and an upgrade of all essential machinery and systems ( electrical, plumbing, mast, rigging, running gear etc).
Due to an unforeseen change in circumstances the vessel is offered for sale at a fraction of the replacement cost and is truely ready to take her new owner's anywhere. "Sleipnir 3" will appeal to anyone who wants true sailing ability, appreciates build quality of the highest standard and understands the freedom that high quality, simple systems provide for remote area cruising.
For the lover of performance sailing, she does 7.1 kt in 8.1 kts of wind, she has 865 mm under bridgedeck clearance to minimize slamming, outboard steering stations that provide excellent vision of the sails and 360 degree vision of the horizon when on watch however on ocean passages the auto pilot does the work and there is a fully weather protected seated position under the hardtop for the watch keeper.
The fully equipped stainless steel topped galley is down aft in the port hull, front and top opening refrigeration amidships forward and within reach of the galley, and a guest double forward in the port hull.
The spacious owner's queen cabin is aft in the starboard hull, bathroom and separate shower forward.
Region
Queensland
Location
Southport QLD
Usage
Family, Leisure, Cruising
Reference
S5449
Year
2008
HIN
AUWWA157025AD8
Rego Number
ON 861998
Rego Expiry
23/04/2025
Designer
Mr. Garry Lidgard
Builder
A. S. Marine Queensland Pty Ltd / Shipwrights Chris Sprejins
Length
49' 0" - 14.94m
Beam
7.6m
Draft
1.1m - 2.1m
Displacement
8.5 tons
Keel / Ballast
Dagger boards
Hull Material
Composite 19mm ATL Duflex, Epoxy, 2x 600g biaxial inside & outside + kevlar outer skin
Deck Material
19mm ATL Duflex, Epoxy, 2x 400g biaxial inside and outside
Engine
N4.38 coupled to ZF MIV15 (new 11/23) and 1 ¼" dia ~ 2205 Stainless propeller shafts.
Aft access from main deck.
Steering: Jefa (Denmark) torque tubes and gearboxes with new spare $6000 Jefa autopilot motor.
Engine Make
Nanni
Horsepower
38hp
Fuel Type
Diesel
Engine Hours
Port: 60 (new 11/2023)
Number Engines
2
Engine Hours (2nd Engine)
Starboard: 130 (new 2022)
Cruise Speed
7 kts under power
Propulsion
Shaft drive with Autoprop H5 (automatic variable pitch) - 3 blade propellers.
Genset
N/A (twin 120A engine alternators and solar panels).
Fuel
300 litre (2x Integral tanks)
Water
400 ltrs (2x Integral tanks)
Galley
Practical U-shaped galley designed for offshore passagmaking with separate food prep area. Deep single bowl, stainless sink integrated into custom stainless bench top with tank or filtered water supply. Sharp 800W 240V microwave. Cutlery and crockery.
Refrigeration
1x Custom 12V 120ltr with eutectic plate (new 3/24)
Freezer
1x Evakool 12V / 240V 110ltr - portable for cockpit
Stove
Force 10,3 burner, LPG gas cooktop with oven and grill
WaterMaker
Schenker Zen 50 12-volt producing 50 litres per hour (new 01/24)
Hot Water System
Nautech 25 litre / 240V & Main Engine heated (new 11/23)
Accommodation
Accommodation areas fully faired and painted for ease of maintenance when cruising. The accommodation is specifically designed for a cruising couple to live aboard comfortably for extended periods with additional guest accommodation for two in a separate hull.
Port Hull - Galley aft and Guest Cabin for forward with new mattress 1/24 and a 3.5 kg top loading lightweight washing machine under.
Stb Hull - Owners Cabin aft ( new mattress 01/24) and bathroom fwd.
Bridgedeck-Large internal saloon with L'shaped settee/bunk ( new cushions 01/24) and nav station opposite facing aft
Cockpit- Table and Integral seating and custom composite helm seats(new upholstery 01/24)
Sphere 3.5kg washing machine (new 01/24).
Port Hull - Galley aft and Guest Cabin for forward with new mattress 1/24 and a 3.5 kg top loading lightweight washing machine under.
Stb Hull - Owners Cabin aft ( new mattress 01/24) and bathroom fwd.
Bridgedeck-Large internal saloon with L'shaped settee/bunk ( new cushions 01/24) and nav station opposite facing aft
Cockpit- Table and Integral seating and custom composite helm seats(new upholstery 01/24)
Sphere 3.5kg washing machine (new 01/24).
Cabins
2 sleeping cabins, owner's Queen bed port aft, guest cabin starboard forward
Berths
1x Queen, 1x Double, 1x Single (saloon)
Shower
1x bathroom, 1x deck
Toilet
1x Jabsco manual (new 3/24). Holding tank: 1x 500 litres.
Entertainment
Hooka 12v dive compressor with hose and regulator.
Stereo via Raymarine audio.
Bose portable speaker with blue tooth.
External LPG BBQ connection fitted (no BBQ).
Stereo via Raymarine audio.
Bose portable speaker with blue tooth.
External LPG BBQ connection fitted (no BBQ).
Dinghy
Swift RIB 3.4m (new 12/23)
Outboard
Yamaha 15hp (approx 10hrs use)
Covers
Cockpit shade covers.
Composite dodger.
Composite dodger.
Ground Tackle
Anchor: 1x Spade 35kg, 1x Delta super high hold power 20kg
Chain: 100m (10mm)
Rope: 80m + 10m chain, 19mm Nylon 3 strand
Windlass: Muir Cheetah electric 12V with remote
Chain: 100m (10mm)
Rope: 80m + 10m chain, 19mm Nylon 3 strand
Windlass: Muir Cheetah electric 12V with remote
Safety Gear
1x MOB
Bilge Pumps
4x Electric 12V + M/E (via 3-way valves)
Life Raft
1x Ocean Safety (4 person)
Epirb
GME Accusat (expiry 08/25)
Life Jackets
4x adult PFD Type 1
Flares
3 x parachute / 2 x red hand / 1 x orange smoke
Fire Protection
2x Extinguisher 1.5Kg ABE
Electrics
House Batteries- 6x US2200 6V deep cycle 696AH (11/23)
Engine Start Batteries- 2x OPTIMA AGM (new 03/24)
Shore power: New installation 11/23 - with electrical contractors certificate with polarity light and Circuit breaker
Power outlet: 240V, 12V
Battery charger: Enerdrive E-Power - 240V /60 Amp (new 11/23)
Solar Panels: 6x Copperflex flexible panels 1300W (new 11/2023)
Alternator: 2 x 120Ah (1 per main engine)
Switchboard: 12V and 240V all with Circuit Breakers
Inverter: Enerdrive E-power 2600W new (11/23).
Engine Start Batteries- 2x OPTIMA AGM (new 03/24)
Shore power: New installation 11/23 - with electrical contractors certificate with polarity light and Circuit breaker
Power outlet: 240V, 12V
Battery charger: Enerdrive E-Power - 240V /60 Amp (new 11/23)
Solar Panels: 6x Copperflex flexible panels 1300W (new 11/2023)
Alternator: 2 x 120Ah (1 per main engine)
Switchboard: 12V and 240V all with Circuit Breakers
Inverter: Enerdrive E-power 2600W new (11/23).
Electronics
Raymarine AIS 700 transceiver
Raymarine SPX30 Autopilot with Dual P70S control heads and Jefa 12V drive
Raymarine Quantum 24 mile Radar
GPS Antenna: Raystar 150(new 11/23) + Digital yacht + Raymarine Multifunction Diplay Internal
Raymarine DST800 Tri Data Depth/Speed/Temperature
Raymarine Axiom Lighthouse 9"MDF Plotter
Plastimo Magnetic 105 Compass
Barometer and Barograph(new 11.23)
Clock: (via GPS)
Raymarine CP100 Sonar Module Fishfinder
Actisense NGT-1 USB Laptop(NMEA 2000) and NGW-1 USB (NMEA 0183) ~ new 2024
C-Maps: Raymarine electronic vector charts
Lowrance Link 8 VHF with AIS + Icom portable VHF
Icom IC-M802 HF/SSB Radio+ Pactor Modem
Raymarine electronic vector charts
Raymarine SPX30 Autopilot with Dual P70S control heads and Jefa 12V drive
Raymarine Quantum 24 mile Radar
GPS Antenna: Raystar 150(new 11/23) + Digital yacht + Raymarine Multifunction Diplay Internal
Raymarine DST800 Tri Data Depth/Speed/Temperature
Raymarine Axiom Lighthouse 9"MDF Plotter
Plastimo Magnetic 105 Compass
Barometer and Barograph(new 11.23)
Clock: (via GPS)
Raymarine CP100 Sonar Module Fishfinder
Actisense NGT-1 USB Laptop(NMEA 2000) and NGW-1 USB (NMEA 0183) ~ new 2024
C-Maps: Raymarine electronic vector charts
Lowrance Link 8 VHF with AIS + Icom portable VHF
Icom IC-M802 HF/SSB Radio+ Pactor Modem
Raymarine electronic vector charts
Sail Inventory
Mainsail: UK Sail makers (Gary Saxby) Hydranet ~ 67m² (2019)
Genoa: UK Sail makers (Gary Saxby) Hydranet ~ 32m² (2019)
Asymmetric: Lee Sails Code Zero Contender Lam 58m² (2021)
Trisail: UK Sail makers (Gary Saxby) Hydranet ~ 19m²
Storm Jib: UK Sail makers (Gary Saxby)
Lazy Jacks: with new Evolution Sails boom bag 01/24
Spare hydranet Jib for downwind wing and wing trade wind sailing.
Mast has 2 tracks (mainsail and trysail) & trysail kept on the boom ready to be hoisted. There is a removable inner forestay for storm jib. Mainsail reefing handled from the safety of the cockpit.
All sails removed, surveyed & refurbished 2023, sail maker advised all in good condition with approx 4-6 years service life remaining.
Genoa: UK Sail makers (Gary Saxby) Hydranet ~ 32m² (2019)
Asymmetric: Lee Sails Code Zero Contender Lam 58m² (2021)
Trisail: UK Sail makers (Gary Saxby) Hydranet ~ 19m²
Storm Jib: UK Sail makers (Gary Saxby)
Lazy Jacks: with new Evolution Sails boom bag 01/24
Spare hydranet Jib for downwind wing and wing trade wind sailing.
Mast has 2 tracks (mainsail and trysail) & trysail kept on the boom ready to be hoisted. There is a removable inner forestay for storm jib. Mainsail reefing handled from the safety of the cockpit.
All sails removed, surveyed & refurbished 2023, sail maker advised all in good condition with approx 4-6 years service life remaining.
Mast / Rigging
S&H Spars Alloy Mast 18.5m
S&H Spars Alloy Boom
Double braid - dyneema 2024running rigging (except Reef/D. Board lines)
Stainless Dyform Standing rigging 2020 & 2023 (current inspection certificate)
Barton furler for the Code Zero, Endless line
S&H Spars Alloy Boom
Double braid - dyneema 2024running rigging (except Reef/D. Board lines)
Stainless Dyform Standing rigging 2020 & 2023 (current inspection certificate)
Barton furler for the Code Zero, Endless line
Deck Gear
Cleats/Lines: 6 mooring cleats + full set of mooring lines
Winches:
2x Andersen Self Tailing 46ST on mast for halyards
4x Andersen Self Tailing 2 x 52ST +2 x 46ST in cockpit
2x Andersen Self Tailing 28ST on aft beam serving traveller
1x Ewincher making all winches electric when required
Fenders: 6
Boat hook: 2
Swim ladder: Custom stainless steel
Dinghy davits: Custom composite with manual purchase to self tailing winch
Icebox / Esky: Evakool 12V / 240V - portable (also listed under 'Freezer')
Numerous cockpit lockers
Winches:
2x Andersen Self Tailing 46ST on mast for halyards
4x Andersen Self Tailing 2 x 52ST +2 x 46ST in cockpit
2x Andersen Self Tailing 28ST on aft beam serving traveller
1x Ewincher making all winches electric when required
Fenders: 6
Boat hook: 2
Swim ladder: Custom stainless steel
Dinghy davits: Custom composite with manual purchase to self tailing winch
Icebox / Esky: Evakool 12V / 240V - portable (also listed under 'Freezer')
Numerous cockpit lockers
Remarks
If you are looking for a fast, easy to handle, very high quality catamaran that has the sailing qualities of a Outremer, Chris White, Mumby or Schionning that is superbly set up with new systems for offshore cruising, check out this amazing, very impressive 49 footer which is literally turn key and ready to take you on your Cruising Dream.... She is Qld and Australian Registered.
CONTACT OUR OFFICE (07) 5502 3124 or Sam Martel 0429 867 913 or Ian Mackenzie 0419 756 540 to arrange an inspection.
Email: sales@catamarancompany.com.au for more information.
DISCLAIMER: The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his surveyor to investigate such details as the buyer desires. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
CONTACT OUR OFFICE (07) 5502 3124 or Sam Martel 0429 867 913 or Ian Mackenzie 0419 756 540 to arrange an inspection.
Email: sales@catamarancompany.com.au for more information.
DISCLAIMER: The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his surveyor to investigate such details as the buyer desires. This vessel is offered subject to prior sale, price change, or withdrawal without notice.